Spectra Vista Corporation SVC HR-1024i, User Manual, Page: 36 / 118

SVC HR-1024i / HR-768i / HR-640i / HR-768si / HR-512i USER MANUAL REV 1.12
S P E C T R O R A D I O M E T E R 3 1 3 1 3 1 3 1
Scan Settings Frame This frame determines the characteristics
of the timed scan.
Scan Type: Reference This option causes reference scans to be
taken on a timed basis. Reference scans
are always displayed in Single Graph
format.
Scan Type: Target
This option causes target scans to be
taken on a timed basis. Target scans may
be displayed in either Single Graph or
Multi Graph format.
Scan Type: Alternate This option causes scans to alternate
between Reference and Target on a timed
basis.
Scan Display: Single Graph
Target scans are displayed one at a time
in a Single Graph display.
Scan Display: Multi Graph
Target scans are displayed together in a
Multi Graph display format. Scans will
stop being acquired, and a warning
message displayed, if the maximum
number of allowed Multi Graph data sets
(24) is reached.
Scan Display: None
Acquired scan data is not displayed.
Save Target Scan Data
When checked, target scans cause a new
data file to be written to disk. Otherwise
the scan data is discarded.
Timing Frame This frame controls scan timing.
Between Scans Allows the user to set the time (minutes /
seconds) between acquired scans. The