SPECS 2D-CCD, User Manual

Page: 14 / 85

13
Manual V2.docx | Status 10.12.2015 | Version 1
9. Set the voltages according to the values in Table 1 (the first line has already been
completed in the previous steps).
Table 1. Ramping up detector values
Ramp time
(s) Udet actual
(V) Udet target
(V) Uscrn actual
(V) Uscrn target
(V)
600 0 0 0 1000
1800 0 1000 1000 0
4000 1000 1000 0 2000
4000 1000 1500 2000 2500
2.4 Conditioning the spin detector
Following the bakeout, you need to prepare a fresh iron film on the tungsten substrate in the
detector. This procedure is described in the Focus Ferrum Spin Detector manual — please see
"Preparing of the Fe film on the W(100) crystal" in the Operation chapter.