Specac Atlas Automatic 40 Ton, User Manual

Page: 10 / 68

User Manual
8
the handle to gain access to the internal pressing area. Remove the
packing inside.
Using a suitable bar and appropriate spanner undo the eye bolt from
the eye bolt assembly of parts. Some force may be needed initially to
overcome the thread-locking sealant that is used to ensure the parts
do not undo in transit.
Now remove the lifting eye bolt pieces away from the press. The screw
bolt and lower spread washer are removed from inside the pressing
area by opening of the front safety guard.
Fit the lead screw assembly as shown in the diagram on page 26. For
operation ensure the bolster pressing anvil face (
10 ) is securely fixed
Lift Eye Bolt
Components
Separated