User Manual
44
Step B – Hold Load for 2 minutes
When the S0 segment has been set the next logical step is to either
apply a Hold Time or a Release function. In our example the Set Hold
Time symbol without auto “top up” has been selected. When S0 has
been set (accepted) from the previous step A, on the Menu Bar S# is
illuminated. Press the accept button (
16
) and the slider cursor bar is
displayed. Use the left (
14
) or right (
15
) button to select segment S1
and then press the accept button (
16
). The screen will change to
illuminate the EDIT symbol on the Menu Bar. Press the accept button
(
16
). The various programming symbols will appear in the Menu Bar.
Use the left (
14
) or right (
15
) button to illuminate the Hold Time without
auto “top up” symbol and press the accept button (
16
) to select. This
symbol will be set in the S1 segment.
Next, set a time in minutes from the slider bar function from the range
set between 0.1 and infinity. (An infinite hold time is selected as 0
(zero) minutes). Use the left (
14
) or right (
15
) button until you have
selected 2.0 minutes.
Note:
Holding the left (14) or right (15) button down will accelerate
the time change interval.
Press the accept button (
16
) to save the time. Segment S1 is now filled
with the Set Hold Time symbol, 2.0 and m as seen in PGM1.
Step C – Release Load to 7.0 tons
When the S1 segment for a Hold Time has been set the next logical
step is to either apply a different “Pump up to” Load or a Release
function. In our example the Medium Release Rate has been chosen
for S2. When S1 has been set (accepted) from the previous step B, S#
is illuminated on the Menu Bar. Press the accept button (
16
) and the
slider cursor bar is displayed. Use the left (
14
) or right (
15
) button to
select segment S2 and then press the accept button (
16
). The screen
will change to illuminate the EDIT symbol on the Menu Bar. Press the
accept button (
16
). The various programming symbols will appear in
the Menu Bar.
Summary of Contents for Atlas Automatic 40 Ton
