ST2516 Series Operation Manual
56
BIN: ENABle <Enable Mask>
Where,
<Enable Mask> = 0 to 7(NR1) enable mask (decimal system)
Transfer some bit to 1, namely hold the corresponding bin enable
Bit No.
2
1
0
BIN NO. BIN3
BIN2
BIN1
For example: WrtCmd(“BIN:ENAB 6”); Set the enable mask from BIN2 to BIN3.
Query Syntax: BIN:ENABle?
Return format: the format and unit of < Enable Mask ><NL^END> are the same as above.
The :BIN:RESult command querys the last bin comparator result of the instrument.
Query Syntax: BIN:RESult?
Return format: < NR1> <NL^END>
Where,
< NR1> = 0 to 7
When the judging result of some bin is “GD”, transfer the corresponding bit to 1
Bin Number
2
1
0
BIN NO.
BIN3 BIN2 BIN1
For example: when < NR1> = 4, only the judging result of BIN3 is “GD’.
7.1.9
STATistics Subsystem Commands
Statistics subsystem commands are used to set the statistics funtion of the instrument, including
statistics state switch, statistics limit, limit mode and statistics data clear.
Command Tree:
