ST2516 Series Operation Manual
31
5)
Performance Index
5.1
Measurement Function
5.1.1
Measurement Parameters and Notations
R
：
Resistance T: Temperature
LPR: Low current mode
5.1.2
Measurement Groups
Five measurement groups are available:
ST2516: R, R-T, T, LPR, LPR-T
ST2516A, ST2516B: R, LPR
5.1.3
Range
Range Mode: AUTO, MANU (HOLD, UP, DOWN)
5.1.4
Trigger
Internal, Manual, External, BUS
Internal: Continuously test a DUT and then output and display the result.
Manual: Press the “TRIGGER” button on the panel, the instrument will test a DUT once and
display the result. This mode keeps in waiting mode when it is not used.
External: Test a DUT once and display the result when the instrument receives an external “start
up” signal from the footswitch of HANDLER interface on the rear panel.
BUS: The measurement of the instrument will be triggered through the communication interface.
5.1.5
Mode of Test Terminal
4-terminal measurement mode
DRIVE HI
：
Current-drive high terminal
DRIVE LO: Current-drive low terminal
SENSE HI
：
Voltage-sense high terminal SENSE LO
：
Voltage-sense low terminal
