ST2516 Series Operation Manual
7
This zone displays all prompt information.
7.
Function zone
This zone is used to change the measurement mode and measurement parameters.
2.4
Introduction to Buttons on Front Panel
2.4.1
[MEAS]
Press <MEAS> to enter into display homepage. Selectable functions in this page are shown as
follows:
<MEAS DISP>
<COMP DISP>
<BIN DISP>
<STATIS DISP>
< >
<MORE 1/2>
<MEAS SETUP>
<TC/∆t SETUP>
(ST2516)
<BIN SETUP>
<SYSTEM SETUP>
< >
<MORE 2/2>
2.4.2
[SYSTEM]
Press the [SYSTEM] button to enter into the <SYSTEM SETUP> page; the following soft keys will be
displayed:
<MEAS DISP>
<COMP DISP>
<BIN DISP>
<STATIS DISP>
< >
<MORE 1/2 >
<MEAS SETUP>
<TC/∆t SETUP>
(ST2516)
<BIN SETUP>
<SYSTEM SETUP>
< >
<MORE 2/2 >
