SoundCraft DC 2020, User Manual

Page: 69 / 190

Switch and Fader Modes
8
The mode of the Switches or Faders on all of the assigned Mono Inputs is
changed by pressing the appropriate mode switch, labelled SW for Switches and
FDR for the Fader. Pressing the Mode switch causes the mode to be cycled through
in the following sequence: Manual, Read, Armed and Write. Note that Manual Mode
is not available whilst the Tape is running. with Mix on
9
The WR (Write) and RD (Read) LEDs indicate which mode the assigned Faders
and Switches are currently in, unless the mode of an assigned channel has been
changed independently. There are separate LEDs for Faders and Switches. The
modes are indicated as follows:
RD WR
Manual: OFF OFF
Read: ON OFF
Armed: ON ON
Write: OFF ON
Note: the mode displayed by the Switches LEDs only applies to those switches on
Mono Inputs which have been selected ( the amber LED next to the switch will be
on to indicate that a particular switch has been selected).
Fader
10
The Fader allows you to add offsets to the fader positions of all of the Mono
Input Faders which are assigned to the Control Group in question.
DC2020 Control Groups 4.29