SoundCraft DC 2020, User Manual

Page: 103 / 190

number of Titles. The Title directory is the bottom level of the directory structure:
individual mix passes are stored as files in the Title directory.
Configuration data is stored on disk. This data is stored at an appropriate level in
the directory structure. For example, a User may set up a password at the user level:
this would allow access to any of the user’s Projects. As a further example, the
timecode frame-rate is held in the Title directory: this allows a different frame-rate
to be set up for different titles.
At any one time, there is a current directory path of user/project/title. This is where
the user is currently working. When the console is powered down and then powered
up again, the system always goes back to the mix page of the current path, i.e. the
same path which was is use when the system was powered down.
Note: when the console is powered on for the first time, the system creates a default
path of USER0/PROJECT0/TITLE0. This allows you to begin mixing immediately.
When a page is selected, some of the touch-pads on it may be inactive due to the
context of what is currently happening. Buttons which are inactive are marked with
a diagonal cross.
Setup System
The Setup system is accessed by pressing the Setup button on the Automation panel.
The page interconnection map is shown below.
In the following pages in the manual, any automation pages which belong to the
Main Automation System are headed with a black banner with white text. The pages
which are in the Setup System are headed with a grey banner with black text.
Default
Mode
On Stop
Switch
Select On
Tape Stop
Default
Settings
Monitor
SIP Safe
Channel
SIP Safe
Stereo
Inputs
Safe
Meter-
bridge
Setup
Glideback
Tape
Machine
Select
MIDI
Events
Presets
Stop Edit
Options
Timecode
Generator
Setup
Menu
DC2020 The Automation Pages 4.63