SoundCraft DC 2020, User Manual, Page: 165 / 190

Starting a New Mix
If you wish to abandon a series of Mix Passes, and to start again, press the New Mix
Touch-pad on the Mix page.
The following will then happen:
•
The Switches and Faders will go into Write Mode.
•
The Mix Title will become, ’New Mix Pass’ followed by the current Mix number
(remember that the next Mix Number is only assigned when the tape stops at the
end of a Mix Pass).
After positioning the tape to the correct place, press Start. You will then have a New
Mix Pass with no previously recorded movements to interfere with the Mix that you
are about to begin.
Note: the old Mix Passes will still be stored on disk and you may reload them later
(provided that they have not been overwritten by wrap around versions).
DC2020 Automated Mixing 4.125