SoundCraft DC 2020, User Manual

Page: 45 / 190

Note: Channels 25-40 may not be present on your console.
EQ
The EQ is split into two parts. The first part is the HF/LF EQ, this consists of two
equalisers which may be independently configured as shelving or bell-response
filters.
9
The HF Bell/Shelf switch configures the HF EQ. The bell-response Q factor is
1.5 .
10
The HF Cut/Boost control provides a cut and boost of +/-15dB.
11
The HF Frequency control, which is calibrated from 500Hz to 16kHz, sets the
shelving frequency cut-off point (-3dB) or the peak frequency, depending upon
whether shelving or bell response has been selected.
12
The LF Bell/Shelf switch configures the LF EQ. The bell-response Q factor is
1.3 .
13
The LF Cut/Boost control provides a cut and boost of +/-15dB.
14
The LF Frequency control, which is calibrated from 50Hz to 1.6kHz, sets the
shelving frequency cut-off point (-3dB) or the peak frequency, depending upon
whether shelving or bell response has been selected.
15
The HF/LF EQ can be switched into the Channel signal path or the Monitor
signal path via the MON switch: when the switch is depressed the HF/LF EQ is
placed in the Monitor signal path.
The second part is the HI MID/LO MID EQ. This consists of two bell-response
equalisers. Each of these may be set one of two Q-factors.
16
The Hi Mid Lo Q/Hi Q switch switches the Q factor between 1.2 and 2.0 .
17
The Hi Mid Cut/Boost control provides a cut and boost of +/-15dB.
18
The Hi Mid Frequency control, which is calibrated from 500Hz to 16kHz, sets
the peak frequency.
19
The Lo Mid Lo Q/Hi Q switch switches the Q factor between 1.2 and 2.0 .
20
The Lo Mid Cut/Boost control provides a cut and boost of +/-15dB.
21
The Lo Mid Frequency control, which is calibrated from 50Hz to 1.6kHz, sets
the peak frequency.
22
The HI MID/LO MID EQ can be switched into the Channel signal path or the
Monitor signal path via the MON switch: when the switch is depressed the HI
MID/LO MID EQ is placed in the Monitor signal path.
23
The EQ IN switch will, when depressed, switch both EQ sections into their
selected paths. When the switch is released neither EQ sections are in their respective
paths. This switch does not affect the Insert Point.
1
2
3
5
6
7
8
10
11
13
14
17
18
20
21
23
24
25
26
27
28
27
29
31
30
32
36
33
35
34
9
12
15
16
19
22
4
DC2020 Mono Inputs 4.5