SoundCraft DC 2020, User Manual

Page: 145 / 190

Title Configuration
The Title Configuration page appears as follows:
The following information is presented:
Screen Title Area
Title only.
Data Fields
The following fields are available:
Locate Pre-roll. Pressing this presents a small numeric keypad on the screen. This
allows you to enter or edit the Locate Pre-roll time. You may also use the Jog Wheel
to change the time information frame-by-frame.
If AUTO PLAY is selected on the Control Panel, and you then press LOCATE0,
the tape machine will wind the tape to the position which is equal to the pre-roll
time before the LOCATE0 time. The tape will then start playing. For example, if
the pre-roll time is set to 2 seconds, and LOCATE0 is set to 1:10:20:15, the tape
would fast-wind to 1:10:18:15 and then play.
Locate Post-roll. Pressing this presents a small numeric keypad on the screen. This
allows you to enter or edit the Locate Post-roll time. You may also use the Jog Wheel
to change the time information frame-by-frame.
If AUTO RETURN is selected on the Control Panel, the tape machine will play the
tape to the position which is equal to the post-roll time after the LOCATE1 time.
The tape will then rewind to LOCATE0. For example, if the post-roll time is set to
3 seconds, and LOCATE1 is set to 1:15:25:03, the tape would stop and rewind at
1:15:28:03.
Drop-in Pre-roll. Pressing this presents a small numeric keypad on the screen. This
allows you to enter or edit the Drop-in Pre-roll time. You may also use the Jog Wheel
to change the time information frame-by-frame.
Drop-out Post-roll. Pressing this presents a small numeric keypad on the screen. This
allows you to enter or edit the Drop-out Post-roll time. You may also use the Jog Wheel
to change the time information frame-by-frame.
Title config
Locate
Pre-roll
Mix
Offset
Mix Frame Rate
Mix Pass
Save Option
Locate
Post-roll
Drop in
Pre-roll
Drop out
Post-roll
Remap
Console
Record
Enable
Record
Remap
OK
DC2020 The Automation Pages 4.105