manualshive.com logo in svg

Sound Devices 688, User Manual

Share
Download
Sound Devices 688 User Manual Download Page 97

User Guide

98

Erasing / Formatting Media

Before recording to CF or SD media, cards must be formatted by the 688.

To format media:

1.  Press the MENU button.

2.  Turn and press the Headphone encoder to select FILE STORAGE.
3.  Do either of the following: 

X

Select Erase/Format CF to reformat a CompactFlash card.

X

Select Erase/Format SD to reformat an SD, SDHC, or SDXC card.

4.  Press the Headphone encoder to begin the formatting process.

⚠

Formatting media will erase all data on the card.

5.  Follow the message(s) that appear on screen and press the Headphone en-

coder to continue. 

6.  Press the METERS button to return to the Main screen.

Cards with a capacity of 32 GB or less will be formatted with the FAT32 

fi

 le sys-

tem. Cards with a capacity greater than 32 GB will be formatted with the exFAT 

fi

 le system. 

L

The exFAT 

fi

 le system is not compatible with Windows XP or Mac OS X 10.6.4 or 

lower.

Summary of Contents for 688



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands