Sound Devices 688 User Manual Download Page 159

Page: 159 / 210

User Guide

160

When the SL-6 is attached, the DC voltage indicator (battery icon) on the 688’s

Main screen will display NP or SL to indicate which power source is active.

External DC Power via SL-6

Normal Voltage

(Green)

Battery Power via NP-1 in SL-6

Warning Voltage

(Yellow)

The color, which could also appear red (critical) or orange (low voltage), indicates

a source’s power level.

Power Screen

When the SL-6 is attached to the 688, the mixer’s Power screen displays the

voltage level of the attached NP-1 battery, the SL-6 external DC power source,

and the SL-6 PowerSafe battery, in addition to the 688’s own power sources.

SL-6 DC Outputs

The SL-6 right panel features four DC power outputs via locking coaxial connec-

tors (numbered 1 through 4) and a USB charging port. Outputs 1 through 4 are

12 V DC outputs that draw from the active SL-6 power source. Outputs 1 and 2

are isolated and do not share a common ground with the system.

Summary of Contents for 688



















































































































































































































Search results

Summary of Contents for 688

Reviews:

Brands by name

Popular brands

Sound Devices 688, User Manual

Search results

Summary of Contents for 688

Reviews:

Brands by name

Popular brands