Sound Devices 688 User Manual Download

Page: 109 / 210

User Guide

110

ARAMETER

ESCRIPTION

PTIONS

Time Zone

Sets the time zone, based on Greenwich Mean

Time (GMT).

• GMT-1:00 – -12.00

• GMT

• GMT+1:00 – +13:00

Daylight Savings

Time

Sets whether or not daylight savings is in effect.

By default, daylight savings is off.

• On

• Off

To set the formats for time and date:

1. Press the MENU button.

2. Do one of the following:

Turn and press the Headphone encoder to select SYSTEM > Time

Format.

Turn and press the Headphone encoder to select SYSTEM > Date

Format.

3. Turn and press the encoder to select a format option.

◦

Time Format options include: 12hr or 24hr.

◦

Date Format options include: mm/dd/yy, dd/mm/yy, or yy/mm/dd.

To set the time and date:

1. Press the MENU button.

2. Turn and press the Headphone encoder to select SYSTEM > Set Time/Date.
3. Turn the encoder to move the highlight to each of the time and date

elds.

4. Press the encoder to select a

eld.

5. Turn the encoder to change the value of each selected

eld.

6. When

nished modifying the time and date

elds, turn and press the encod-

er to select Done.

To select the time zone:

1. Press the MENU button.

2. Turn and press the Headphone encoder to select SYSTEM > Time Zone.
3. Turn and press the encoder to select the proper GMT time zone for your

location.

Summary of Contents for 688



















































































































































































































Search results

Summary of Contents for 688

Reviews:

Related manuals for 688

Brands by name

Popular brands

Sound Devices 688, User Manual

Search results

Summary of Contents for 688

Reviews:

Related manuals for 688

Brands by name

Popular brands