Sound Devices 688 User Manual Download

Page: 27 / 210

User Guide

3. Adjust the settings based on the following table:

ARAMETER

ESCRIPTION

PTIONS

Ext DC Ref

Calibrates the power level indicator accord-

ing to the type of external DC source. By

default, this is set to 12V Ext DC.
Select the appropriate option for the

external DC power.

• 12V Ext DC

• NiMH

• Expanded NiMH

• 12V Lead Acid

• 14V Li-ion

• Full Range

Ext DC Loss

Choose what action the 688 should take

when external power is removed or voltage

drops below the set threshold. By default,

this is set to Switch Power Source.

• Switch Power

Source

• Shut down

If the Ext DC Loss setting is con

gured to Switch Power Source when

external power is lost, but there are no internal batteries with ade-

quate voltage in the 688, then automatic PowerSafe shutdown will

occur.

SL-6 settings are only enabled when an SL-6 is attached to the 688.

PowerSafe

When all connected power sources are depleted or power is lost unexpectedly,

the PowerSafe™ circuitry activates. The 688 displays a warning, stops any ac-

tive recordings,

nishes writing

les, and shuts down. The PowerSafe battery

powers the 688 during this time. This feature ensures that

les are protected

even in the event of unexpected power loss.

The PowerSafe battery recharges from the active power source only when the 688

is powered on.

Summary of Contents for 688



















































































































































































































Search results

Summary of Contents for 688

Reviews:

Related manuals for 688

Brands by name

Popular brands

Sound Devices 688, User Manual

Search results

Summary of Contents for 688

Reviews:

Related manuals for 688

Brands by name

Popular brands