Sound Devices 688 User Manual Download Page 184

Page: 184 / 210

185

CL-12 LINEAR FADER CONTROLLER

EATURE

ESCRIPTION

R Routing Indicator

Illuminates when the input channel has been routed to the right bus.
• Off = not routed

• Yellow = post-fade routing

X2 Routing Indicator

Illuminates when the input channel has been routed to the X2 output.
• Off = not routed

• Green = pre-fade routing

• Yellow = post-fade routing

SEL Button

Selects or deselects an input channel, or multiple input channels for

adjustment.
Each SEL button illuminates when a channel is selected.
While selected, an input channel may be routed to L, R, X1 or X2.

It also may be turned on, armed, or named. Additionally, high-pass

ltering, phase inversion, or EQ may be applied.

For more information, see

Selecting One or More Input Channels

. See

also

Setting SEL to follow PFL

ON Indicator

Illuminates yellow to indicate the input channel is on.

ARM Indicator

Illuminates red to indicate the corresponding isolated track (ISO) is

armed for recording.

MIXASSIST Indicator

Illuminates to indicate auto-mixing activity. When the input is open,

the LED is green. As the input closes, the LED is turned off.

PFL Buttons

(Pre-/Post-Fade Listen)

Activates or deactivates pre- or post-fade listen of inputs 1-12 to the

headphone monitor.
For more information, see

Activating PFL of an Input

. See also

Setting

SEL to follow PFL

Linear Faders

100 mm low latency linear controls for adjusting the fader levels of

inputs 1-12. Ranges from Off, - 80 to +16 dB.
Each input’s linear fader gain is displayed on the mixer’s Input

Settings screen. Calibrate linear faders to 0 dB via the mixer’s

SYSTEM > Fader/Pan Calibration menu.

LED Meters

Displays 7-segment pre- or post-fade metering, plus pre- and post-

fade limiter LED indicator for input channels 1-12.

Summary of Contents for 688



















































































































































































































Search results

Summary of Contents for 688

Reviews:

Brands by name

Popular brands

Sound Devices 688, User Manual

Search results

Summary of Contents for 688

Reviews:

Brands by name

Popular brands