Sound Devices 688 User Manual Download Page 66

Page: 66 / 210

RECORDING

MENU

ESCRIPTION

PTIONS

Record to CF

Sets the type of

le and which tracks to

record to the CF card.
The default is Wav Poly.

• Off

• Wav Poly

• Wav Poly (ISOs Only)

• Wav Poly (LR Only)

• Wav Poly (X1X2 only)

• MP3 (LR)

• MP3 (X1X2)

• Wav Mono

• Wav Mono (ISOs only)

Record to SD

Sets the type of

le and which tracks to

record to the SD card.
The default is Wav Poly.

• Off

• Wav Poly

• Wav Poly (ISOs Only)

• Wav Poly (LR Only)

• Wav Poly (X1X2 only)

• MP3 (LR)

• MP3 (X1X2)

• Wav Mono

• Wav Mono (ISOs only)

When a CL-12 is in use and both media are set to Wav Mono, the following message will appear

when the REC button is pressed to begin recording.

“When CL-12 is in use, it is highly recommended to record monophonic

les to only one card. Set

one card to polyphonic and the other to monophonic.”

MP3 Bit Rate

The bit rate of recorded MP3

les.

The default is 320kbs.

• 320kbs

• 192kbs

• 128kbs

Sample Rate

The internal sample rate and sample rate

of recorded WAV

les.

The default is 48k.

• 44.1k

• 47.952k

• 47.952kF

• 48k

• 48.048k

• 48.048kF

• 88.2k

• 96k

• 192k

Bit Depth

The bit depth of recorded WAV

les.

The default is 24.

• 24

• 16

Pre-roll Time

Adjust the amount of record time to be

appended before each recording. Maximum

value is 3 seconds when recording WAV

Mono

les to any media.

Higher sample rates also limit pre-roll.

Rates of 88.2 and 96k should be 3 sec-

onds, and 192 kHz is 1 second.
The default is 0 seconds.

• 0 - 6 seconds (1s increment)

Summary of Contents for 688



















































































































































































































Search results

Summary of Contents for 688

Reviews:

Brands by name

Popular brands

Sound Devices 688, User Manual

Search results

Summary of Contents for 688

Reviews:

Brands by name

Popular brands