manualshive.com logo in svg

Sound Devices 688, User Manual

Share
Download
Sound Devices 688 User Manual Download Page 55

User Guide

56

Turning the Auto Mixer On or Off

By default, auto-mixing is turned off, but it may be turned on and any of the 12 

inputs can be assigned to the Auto Mixer. See also 

Assigning Inputs to the Auto 

Mixer 

for more information.

To turn on automatic mixing:

1.  Access the Auto Mixer screen.

2.  Press the Headphone encoder to activate Mode selection. 
3.  Turn and press encoder again to select a mode to use from one of two op-

tions: MixAssist, Dugan AutoMix. 

L

Auto Mixer, in either mode, is disabled automatically when Main menu option RE-

CORDER > Sample Rate is set to a value higher than 48.048 kHz.

The Auto Mixer screen varies, depending on what mode is chosen.

Input not assigned to MixAssist

MixAssist is On

Input assigned to MixAssist

Variable Off-Attention Setting

Input not assigned to Dugan

Dugan AutoMix is On

Input assigned to Dugan

Both Auto Mixer modes are designed for use with multi-mic speech 

applications and are not intended for musical applications. For more 

information about each mode, see 

Overview of MixAssist

 and 

Overview of 

Dugan Automixing

.

To turn off automatic mixing for all inputs:

X

From the Auto Mixer screen, select Off in the Mode section.

Summary of Contents for 688



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands