203
CL-12 LINEAR FADER CONTROLLER
2
20
20
Adjusting CL-12’s LED Brightness
Depending on the work environment, the brightness of the CL-12’s LED may
require adjustment.
To adjust LED brightness:
1. Press MENU and scroll to CL-12.
2. Select LED Brightness.
3. Turn the Headphone encoder to adjust value up or down in 1% increments
from a minimum of 5% up to 100%.
L
TIP: LED brightness may be further boosted by connecting a USB 5 V source to the
DC Boost Input port on the back panel of the CL-12.
Replacing Side Panels
The CL-12 Alaia comes equipped with custom, hand-crafted hardwood side pan-
els; however, included with the CL-12 Alaia is the Aluminum Endcap Kit, which
contains a set of black aluminum side panels like those on the standard CL-12
model.
To replace the wood with metal side panels:
1. Use the 1/16-inch hex L key, supplied with the kit, to remove the 9 but-
ton-head screws and washers from each side of the CL-12 Alaia. The wood
side panels will then come off.
2. Position each black aluminum side panel so that the holes in the panel are
aligned with threaded holes in the CL-12 Alaia’s chassis.
3. Use the screws, supplied with the kit, to fasten the panels, and tighten with
a Phillips-head screwdriver (not supplied).
