manualshive.com logo in svg

Sound Devices 688, User Manual

Share
Download
Sound Devices 688 User Manual Download Page 64

65

RECORDING

6

6

To make a recording:

1.  Push up the Transport control. Recording will begin.  

While recording, both the take name background color (top of Main screen) 

and timecode counter (bottom left of Main screen) will become red, and the 

absolute time counter (bottom of Main screen) will run. Additionally, the 

time remaining value of CF and SD will appear yellow while the media is 

being accessed.

Take name during recording

Timecode during recording

Yellow text indicates media is being written to

2.  Press in the Transport control to stop recording.

L

Some transport controls, such as start/stop record and arming tracks may be done 

from the Wingman app. For more details, see 

Wingman Integration: 6-Series

.

 Arming or Disarming Recording Tracks

The 688 features 16 recording tracks. Each of the 12 inputs is permanently 

routed to its associated ISO track. Buses L, R, X1, and X2 can also be armed for 

recording. 
ISOs can be sent to both pre- and post- fade. X1 and X2 can record any combi-

nation of channels pre- or post-fade.

L and R tracks (Armed)

Armed ISO track

Unarmed ISO track

Powered off input

Summary of Contents for 688



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands