manualshive.com logo in svg

Sound Devices 688, User Manual

Share
Download
Sound Devices 688 User Manual Download Page 161

User Guide

162

Turning Off Power to Rx Slots

When the SL-6 is attached, the 688 provides a sub-menu option that lets users 

power off unused receiver slots in the SL-6. 

L

Sound Devices recommends that you do not manually power on or off receivers 
from the Rx interface when connected to the SL-6.

To power on or off Rx slots 1-3 in an SL-6:

1. Press 

MENU.

2.  Select SL-6 > Receiver Slot Power. The Receiver Slot Power screen appears.

3.  Select Slot 1, 2 or 3. Options include On or Off. By default, all slots are 

powered on.

L

The Receiver Slot Power settings are not stored as part of factory defaults or 

custom con

fi

 gurations saved in Quick Setup 

fi

 les.

Using Antenna Distribution

Two BNC antenna connections (A and B) are provided for attaching antennas 

to the antenna distribution system. Antennas with an SMA connection may be 

used with a BNC to SMA adapter, which is included with the SL-6.
The antennas on the SL-6 provide improved diversity performance due to wider 

spacing than those directly mounted on the receivers. This can reduce the in-

stances of signal dropouts due to destructive cancellation of re

fl

 ecting RF sig-

nals.
Good performance will be obtained when antennas are mounted directly to the 

SL-6 BNC connectors. Quarter wave whip antennas are typically used in this 

scenario with the SL-6 housing providing the reference plane.

Summary of Contents for 688



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands