Sound Devices 688 User Manual Download Page 73

Page: 73 / 210

User Guide

crophones) or Ext 15V Mic (for condenser microphones). When the Slate or

COM function is active, the 688 will use this microphone.

Setting Slate Mic Gain

The gain of the slate mic is 36 dB by default. If this gain is too high, it can be

adjusted:

To adjust slate microphone gain:

1. Press the MENU button.

2. Turn and press the Headphone encoder to select COMMS/RETURNS > Slate/

Com Mic Gain.

3. Turn the Headphone encoder to adjust slate microphone gain (0 dB - 56

dB).

For quick adjustment of slate microphone gain, slide the MIC/TONE switch to the

left and hold while turning the Headphone encoder.

Routing the Slate Mic

By default, the slate mic is routed to all outputs and tracks. This routing can be

customized.

To route the slate microphone:

1. Press the MENU button.

2. Turn and press the Headphone encoder to select COMMS/RETURNS > Slate

Routing. The Slate Routing screen is displayed.

3. Do one of the following:

Turn the Headphone encoder to move the orange highlight horizontally.

Turn the Select encoder to move the orange highlight vertically.

4. Press either encoder to change the selected source between Off (black) and

On (blue).

Summary of Contents for 688



















































































































































































































Search results

Summary of Contents for 688

Reviews:

Brands by name

Popular brands

Sound Devices 688, User Manual

Search results

Summary of Contents for 688

Reviews:

Brands by name

Popular brands