manualshive.com logo in svg

Sound Devices 688, User Manual

Share
Download
Sound Devices 688 User Manual Download Page 68

69

RECORDING

6

6

To change the MP3 bit rate:

1.  Press the MENU button.

2.  Turn and press the Headphone encoder to select RECORDER > MP3 Bit 

Rate.

3.  Turn and press the Headphone encoder to select a bit rate. Options include: 

128, 192, and 320 kbs.

 Setting the Sample Rate

The 688 records WAV 

fi

 les at 48 kHz sample rate by default.

To set sample rate:

1.  Press the MENU button.

2.  Turn and press the Headphone encoder to select RECORDER > Sample Rate.
3.  Turn and press the Headphone encoder to select a sample rate. Options in-

clude: 44.1k, 47.952k, 47.952kF, 48k, 48.048k, 48.048kF, 88.2k, 96k, and 

192k.
The sample rate value is stored in 

fi

 le metadata. Those options with “F” are 

F mode rates. The F stands for “faux” or “Fostex”.

Certain restrictions apply when using sample rates at or greater than 88.2 kHz:

88.2 - 96 

K

H

Z

192 

K

H

Z

Maximum record tracks

8

6

WAV mono recording

Warning Message displayed: Sample rate limit for Wav Mono 

recording exceeded. Reduce sample rate or set to Wav Poly.

Maximum pre-roll time

3 seconds

1

MixAssist

Disabled

ISO 7-12 recording

Disabled

RTN loopback

Available

Disabled

High-pass 

fi

 lters

Unchanged

Off or 50 Hz

X3 - X6 outputs

Available

Disabled

AES outputs

Available

Disabled

Limiters

Available

Disabled

Input delay

Available

Disabled

Output delay

Available

Disabled

Summary of Contents for 688



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands