165
SL-6 POWERING AND WIRELESS SYSTEM
16
16
To route a receiver to an input:
1. Slide the PFL switch to access the Input Settings screen for the respective
input.
2. Press the Headphone encoder to display the list of available input sources.
3. Turn and press the Headphone encoder to select SL-6. The SL-6 Routing
screen is displayed. Wireless receiver outputs are represented as rows and
688 inputs are represented as columns. Blue boxes indicate active assign-
ments.
4. Do any of the following:
X
Turn the Select encoder to move the orange highlight vertically and
press the encoder to activate or deactivate the route.
X
Turn the Headphone encoder to move the orange highlight horizontally
and press the encoder to activate or deactivate the route.
L
When a wireless receiver output is routed to a 688 input, that channel’s input
source is set to SL-6. When a wireless receiver output is not routed from a 688
input, that channel’s input source is set to OFF.
Accessing the Receiver Overview Screen
The Receiver Overview screen displays summary information for all receivers
connected to the SL-6. Information on this screen is read-only.
To access the Receiver Overview screen via button shortcut:
X
HP + METERS: Press the Headphone encoder, then press the METERS but-
ton.
To access the Receiver Overview screen from the Main menu:
1. Press the MENU button.
2. Turn and press the Headphone encoder to select SL-6 > Receiver Overview.