177
SL-6 POWERING AND WIRELESS SYSTEM
17
17
To initiate an RF scan and assign a frequency :
1. Press HP + METERS to view the Receiver Overview screen.
2. Slide the MIC/TONE switch to the left.
The scan displays a graph showing signal activity of the RF spectrum from
low to high frequency, with a white vertical line marking the cursor position,
beneath which is displayed the selected frequency.
Cursor
Selected Frequency
Transmitter battery level
Frequency Range: Low
Title
F
Frequency Range: High
Scan
Graph
SEE DEMO VIDEO
L
A scan can typically take a number of seconds. Although, with three slot-
in receivers in the SL-6, the RF Scan’s triple-scan capability utilizes parallel
processing to cut the time it takes to run the scan by one-third.
3. Do any of the following:
X
Turn the Select encoder to zoom in or out.
X
Turn the Headphone encoder to move the cursor and select a frequency.
X
Slide the MIC/TONE switch to the left to perform the scan again.