manualshive.com logo in svg

Sony Ipela PCS-G50, Operating Instructions Manual, Page: 84 / 259

Share
Download
Sony Ipela PCS-G50 Operating Instructions Manual Download Page 84

84

Starting a Conference by Calling a Remote Party

IP:

 Connects to the videoconferencing system of a remote party via a LAN.

ISDN:

 Connects to the videoconferencing system of a remote party via an 

ISDN.

ISDN (2B):

 Connects to the H.221-format videoconferencing system via 2B 

channels of the ISDN connection.

ISDN (Telephone):

 Connects to the phone of a remote party to conduct a voice 

meeting via the ISDN connection.

Multipoint: 

Connects to the videoconferencing system for a multipoint 

conference.

SIP:

 Connects to an IP phone using SIP.

3

Configure the line.

When using the LAN

1

Enter the IP address of a remote party to connect in the IP text box. 

Use the 

V

, 

v

, 

B

 or 

b

 button on the Remote Commander to select the IP text 

box, then press the PUSH ENTER button. Then enter the IP address with 
the number buttons on the Remote Commander. Enter the host name and 
domain name when using the DNS server in the IP text box (ex. 
host.domain). When using the gatekeeper, enter the user name and user 
number registered in the LAN Setup menu (page 63).

• You can enter a dot (.) with the 

b

 or 

 button on the Remote Commander.

• To correct the entered number, press the PinP (BACK SPACE) button on the 

Remote Commander. The last entered number is deleted.

• To delete the entered IP address, press the DISPLAY (CLEAR) button on the 

Remote Commander.

Notes

Summary of Contents for Ipela PCS-G50




































































































































































































































































Reviews:

No comments