manualshive.com logo in svg

Sony Ipela PCS-G50, Operating Instructions Manual, Page: 13 / 259

Share
Download
Sony Ipela PCS-G50 Operating Instructions Manual Download Page 13

13

System Components

TV monitor

A TV or projector, etc. is required to monitor the images for videoconferencing system.

Optional equipment especially designed for use with the PCS-G50/G50P

The following optional devices are used to enhance your videoconference.

IR repeater

Allows you to simultaneously turn on and off the 
Communication Terminal and the TV that is being 
used as a monitor.

Remote Control Receiver

Connects to the Communication Terminal and 
receives signals from the remote commander.

Optional Equipment

Unit

Description

TV, Projector, etc.

Used as a monitor and speakers.

Unit

Description

PCSA-STMG70 Stand

This stand can be used to place the Communication 
Terminal on end.

PCSA-STCG70 Camera Stand Stand for the Camera Unit.

PCSA-B384S ISDN Unit

Used to connect to an ISDN line. Up to three ISDN 
lines; 6B channels usable.

Unit

Description

Summary of Contents for Ipela PCS-G50




































































































































































































































































Reviews:

No comments