Sony Ipela PCS-G50, Operating Instructions Manual, Page: 242 / 259

242
Specifications
When H.323 MCU software is
installed (Default)
When “Port Number Used” is set to
“Default” in NAT/Port of the LAN Setup
menu, the PCS-PG50/PG50P operated as the
main terminal uses the following port
numbers.
When H.323 MCU software is
installed (Custom: TCP Port
Number 3000 and UDP Port Number
3000)
When “Port Number Used” is set to
“Custom” in NAT/Port of the LAN Setup
menu, the PCS-PG50/PG50P uses the port
numbers defined by the values entered in
“TCP Port Number” and “UDP Port
Number”.
For example, when “TCP Port Number” is
set to “3000” and “UDP Port Number” is set
to “3100”, the PCS-PG50/PG50P operated
as the main terminal uses the following port
numbers.
Signal Port number
RAS (PCS-G50/
G50P) Any number from 3000
to 3002 (using
GateKeeper)
RAS
(GateKeeper) 1718 or 1719 (using
GateKeeper)
Q.931 (dial) Any number from 3000
to 3002
Q.931 (answer) 1720
H.245 Any number from 3000
to 3002
Audio RTP 3100
Audio RTCP 3101
Video RTP 3102
Video RTCP 3103
FECC RTP 3104
FECC RTCP 3105
Data conference/
RTP 3106
Data conference/
RTCP 3107
Signal Port number
(First point) Port number
(N
th
point)
RAS (PCS-
PG50/PG50P) Any number from 2253 to
2263 (using Gate
Keeper)
RAS (Gate
Keeper) 1718 or 1719 (using Gate
Keeper)
Q.931 (dial) Any number from 2253 to
2263
Q.931 (answer) 1720
H.245 Any number from 2253 to
2263
Audio RTP 49152 49152+20 ×
(N-1)
Audio RTCP 49153 49153+20 ×
(N-1)
Video RTP 49154 49154+20 ×
(N-1)
Video RTCP 49155 49155+20 ×
(N-1)
FECC RTP 49156 49156+20 ×
(N-1)
FECC RTCP 49157 49157+20 ×
(N-1)
Data
conference/RTP 49158 49158+20 ×
(N-1)
Data
conference/
RTCP 49159 49159+20 ×
(N-1)
Signal Port
number
(First point) Port number
(N
th
point)
RAS (PCS-
PG50/PG50P) Any number from 3000 to
3010 (using Gate
Keeper)
RAS
(GateKeeper) 1718 or 1719 (using Gate
Keeper)
Q.931 (dial) Any number from 3000 to
3010
Q.931 (answer) 1720
H.245 Any number from 3000 to
3010
Signal Port number
(First point) Port number
(N
th
point)