Sony Ipela PCS-G50, Operating Instructions Manual, Page: 25 / 259

25
System Connections
System Connections
This section describes the typical system connections.
• Be sure to turn off all the equipment before making any connections.
• Do not connect/disconnect the camera cable or the interface cable with the power on.
Doing so may damage the Camera Unit, Communication Terminal or ISDN Unit.
• For safety, do not connect the 100BASE-TX/10BASE-T connector to a network that
applies an excess voltage via the 100BASE-TX/10BASE-T connector.
• Used with an ISDN Unit for the first time, the Communication Terminal may
automatically upgrade the software of the ISDN Unit. While the upgrading message
is displayed on the monitor screen, be sure not to turn off the Communication
Terminal. Doing so may cause malfunction of the system.
Notes
System Connection via a LAN
TERMINAL VISCA OUT
(MIXED) AUX
AUX MONITOR
LINE
AUX CONTROL
VIDEO OUT
AUDIO OUT AUDIO IN
MIC
VIDEO IN
EC-MIC
CTRL-S
RGB OUT DSB
ISDN UNIT
IR OUT
1 2
1 2
1 2
1 2
DC 19.5V
CAMERA AUX IN
WHITE
BOARD
100BASE-TX/
10BASE-T
(PLUG IN POWER)
PCSA-CG70/CG70P
Camera Unit
to TERMINAL
PCS-PG50/PG50P
Communication
Terminal
Camera cable*
S-video cable*
Power cord*
to VIDEO IN
to
AUDIO
OUT
to
VIDEO
OUT
to
S-video
input
to audio input
to 100BASE-TX/
10BASE-T
to LAN
TV monitor**
to a wall outlet
to DC19.5V
PCS-AC19V6
AC adaptor
to a wall outlet
* supplied
** not supplied
UTP cable (category 5, straight)**
Audio cable*
PCS-A1 Microphone*
to MIC 1