Sony Ipela PCS-G50, Operating Instructions Manual, Page: 53 / 259

53
Registering Local Information
Rate
Displays in real time the number of
connected lines and their transfer rates.
MLP Rate
Displays the MLP (Multi Layer Protocol)
rate.
HMLP Rate
Displays the HMLP (High Speed Multi
Layer Protocol) rate.
LSD Rate
Displays the LSD (Low Speed Data) rate.
Line I/F
Displays the line interface being used.
Remote camera control
Displays whether the unit is ready to operate
both cameras.
T.120 Data
Displays whether the unit is ready to hold a
T.120 Data conference.
H.239 DSB
Displays whether the unit is ready to use the
H.239 presentation mode.
The Audio Setup menu is used to set various
audio items.
Page 1/2
The level meter indicating the audio input
level is displayed.
Input Select
Allows you to select the audio input.
MIC: Inputs audio from the microphone.
AUX: Inputs audio from auxiliary external
equipment.
MIC+AUX: Inputs audio from the
microphone and auxiliary external
equipment.
Mic Select
Allows you to select the microphone to be
used.
MIC: Uses the microphone connected to the
Communication Terminal.
DSB MIC: Uses the microphone connected
to the Data Solution Box.
LINE: Uses the microphone connected to
the AUDIO IN LINE jack.
EC-MIC: Select this when using PCSA-A7
Microphones.
CTE
Allows you to select the input where the
CTE-600 Communication Transducer is
connected.
Off: Does not use the CTE-600
Communication Transducer.
LINE: Inputs from the AUDIO IN LINE
jack of the Communication Terminal.
DSB AUX IN: Inputs from the AUX IN jack
of the Data Solution box.
Audio Setup Menu
Input Select MIC
Page: 1/2
Audio Setup
Save Cacel
MIC Mic Select
Off CTE
On Echo Canceller
Off Lip Sync
On
Recording Mute