manualshive.com logo in svg

Sony Ipela PCS-G50, Operating Instructions Manual, Page: 187 / 259

Share
Download
Sony Ipela PCS-G50 Operating Instructions Manual Download Page 187

187

Using the Display Control

• When your system is in the Split or Split (Fixed) mode, you cannot control the camera 

on any connected remote terminals.

Split (Fixed) mode

The pictures from the connected remote terminals and the picture of the local 
terminal are displayed by splitting the monitor screen as the same manner as 
those in the split mode.
You can specify a picture among the split windows to fix it in the lower right 
window for the six-split mode. Pictures other than the specified one will be 
displayed in the split windows in order of connecting.

Voice Activate mode

Detects the terminal with the speaker with the loudest voice among the 
connected terminals, and displays the picture of that terminal in full screen on 
all the sites. The “V.A” indicator appears when the Voice Activate mode is 
activated. The 

 indicator with alphabet showing the terminal of the 

displayed picture also appears. The 

 indicator is displayed while the local 

picture is broadcast.

Broadcast mode

You can specify the terminal to display the picture of that terminal in full 
screen on all the sites. The 

 indicator with alphabet showing the terminal 

of the displayed picture also appears. The 

 indicator is displayed while the 

local picture is broadcast.

The picture of the specified terminal is 
always displayed in this window.

Six-split window

Summary of Contents for Ipela PCS-G50




































































































































































































































































Reviews:

No comments