Sony Ipela PCS-G50, Operating Instructions Manual, Page: 209 / 259

209
Location and Function of Parts and Controls
Location and
Function of Parts
and Controls
Front/Right side
a
ON LINE indicator
Blinks during dialing or answering and
lights in blue when connection is
completed. It turns off when the system
is disconnected.
b
POWER/STANDBY indicator
Lights in green when the power switch is
set to on (
@ ). Lights in orange when the
Communication Terminal is set to
standby mode.
c
LAN ALERT indicator
Lights in yellow when packet error (loss) or
link error occurs during communication.
d
Memory Stick slot
Insert a “Memory Stick” (not supplied)
into this slot.
e
Power switch
Turns on/off the Communication
Terminal. The power is on when the
switch is set to the
@
side and off when
the switch is set to the
a
side.
Rear
a
AUDIO OUT (MIXED) jack (phono jack)
Used when recording the sound to
minute a conference. The mixed sounds
of a local and remote parties are output
from this jack.
b
AUDIO OUT jack (phono jack)
Connect to the audio input of the TV
monitor.
c
AUDIO IN AUX jack (phono jack)
Connect to the audio output of the
optional VCR or audio equipment.
d
AUDIO IN LINE jack (phono jack)
Used when connecting to the optional
CTE-600 Communication Transducer or
an external microphone mixer.
e
MIC1/MIC2 (PLUG IN POWER)
jacks (minijack)
Connect to the optional PCS-A1 or
PCSA-A3 microphone. Power is
supplied to the microphone from the
Communication Terminal.
f
VIDEO IN connector
Connect to the TERMINAL connector
on the rear of the Camera.
Appendix
PCS-PG50/PG50P
Communication Terminal
1 2 3
4 5
(MIXED) AUX
AUX MONITOR
LINE
AUX CONTROL
VIDEO OUT
AUDIO OUT AUDIO IN
MIC
VIDEO IN
EC-MIC
CTRL-S
RGB OUT DSB
ISDN UNIT
IR OUT
1 2
1 2
1 2
1 2
DC 19.5V
CAMERA AUX IN
WHITE
BOARD
100BASE-TX/
10BASE-T
(PLUG IN POWER)