Sony Ipela PCS-G50, Operating Instructions Manual, Page: 46 / 259

46
Registering Local Information
This chapter describes the registration and
settings to be carried out by the system
administrator.The chapter is intended to be
read by the system administrator.
Registering Local
Information
Before starting a conference, register the
required information on the local terminals
of the system using the Setup menu for
administrator. This section describes how to
display the Setup menus for the
administrator and gives a introduction to the
menus.
1
Press the MENU button on the
Remote Commander, or use the
V
,
v
,
B
or
b
button to select “MENU” in the
launcher menu, then press the PUSH
ENTER button.
The Setup menu appears on the monitor
screen.
2
Hold down the MENU button.
The Setup menu for the administrator
appears on the monitor screen.
You can also display the Setup menu for
the administrator by pressing the numeric
button 9 on the Remote Commander twice
while the Setup menu or the screen in
communication is displayed.
Choosing the following items from the
Setup menu for the administrator opens
the respective menus.
Dial: Dial Setup menu (see page 47)
Answer: Answer Setup menu (see page
49)
Communication: Communication
Setup menu (see page 49)
Status: Status menu (see page 52)
Audio: Audio Setup menu
(see page 53)
Video: Video Setup menu
(see page 55)
General: General Setup menu
(see page 56)
Administrator: Administrator Setup
menu (see page 59)
LAN: LAN Setup menu (see page 62)
ISDN: ISDN Setup menu (see page 67)
Information: Information menu (see
page 70)
SIP: SIP setup menu (see page 71)
The SIP setup menu only appears when
the PCSA-SP1 optional SIP software is
installed.
Chapter 2:
Registration and
Setup for System
Administrators
Opening the Setup Menu for
the Administrator
Note
Note
Dial
Communication
Audio
General
Information
LAN
Answer
Status
Video
Administrator
ISDN
Setup
SIP