Sony Ipela PCS-G50, Operating Instructions Manual, Page: 241 / 259

241
Specifications
TERMINAL connector (PCSA-
DSB1S)
D-sub 15-pin connector (male)
When connecting one-to-one
(Default)
When “Port Number Used” is set to
“Default” in the LAN Setup menu, the PCS-
G50/G50P uses the following port numbers.
(MCU option not installed)
When connecting one-to-one
(Custom: TCP Port Number 3000
and UDP Port Number 3000)
When “Port Number Used” is set to
“Custom” in NAT/Port of the LAN Setup
menu, the PCS-PG50/PG50P uses the port
numbers defined by the values entered in
“TCP Port Number” and “UDP Port
Number”.
For example, when “TCP Port Number” is
set to “3000” and “UDP Port Number” is set
to “3100”, the PCS-PG50/PG50P uses the
following port numbers.
12 RX Serial receive data
13 19.5V 19.5V
14 GND Ground
Pin Signal Description
1 Video Video signal
2 Video.GND Video signal ground
3 LINE A+ Line audio+
4 LINE A– Line audio–
5 MIC+ Mic
6 MIC– Microphone–
7 RD+
8 RD– Receive–
9 19.5V 19.5V
10 NC –
11 AGND Analog ground
12 NC –
13 TD+ Transmit data+
14 TD– Transmit data–
15 GND Ground
Pin Signal Description
9 15
1 8
List of Port Numbers Used on
the PCS-PG50/PG50P
Signal Port number
RAS (PCS-G50/
G50P) Any number from 2253
to 2255 (using
GateKeeper)
RAS
(GateKeeper) 1718 or 1719 (using
GateKeeper)
Q.931 (dial) Any number from 2253
to 2255
Q.931 (answer) 1720
H.245 Any number from 2253
to 2255
Audio RTP 49152
Audio RTCP 49153
Video RTP 49154
Video RTCP 49155
FECC RTP 49156
FECC RTCP 49157
Data conference/
RTP 49158
Data conference/
RTCP 49159