Sony Ipela PCS-G50, Operating Instructions Manual, Page: 158 / 259

158
Displaying the Picture on a Projector or Monitor
When connecting a monitor to the RGB OUT connector on the
Data Solution Box
1
Connect your monitor to the RGB OUT connector of the Communication
Terminal.
2
Set “Connection” in “Monitor Out” in the Video Setup menu to “RGB
OUT (DSB)”.
3
Reconnect the monitor to the RGB OUT connector of the Data Solution
Box.
The first monitor for displaying motion pictures is fixed to the monitor
connected to the VIDEO OUT MONITOR 1 connector of the Communication
Terminal (monitor A in the illustration of the previous page).
Select the output to the second and third monitors with “Connection” under
“Monitor Out” in the Video Setup menu.
VIDEO OUT2: Outputs the signal to the monitor connected to the VIDEO
OUT MONITOR 2 connector (monitor B in the illustration of the previous
page) of the Communication Terminal.
RGB OUT: Outputs the signal to the monitor (monitor C in the illustration of
the previous page) connected to the RGB OUT connector of the
Communication Terminal.
DSB: Outputs the signal to the monitor (monitor D in the illustration of the
previous page) connected to the RGB OUT connector of the Data Solution
Box.
Outputting the Signal to the Second or Third Monitor