Sony Ipela PCS-G50, Operating Instructions Manual, Page: 226 / 259

226
On-screen Messages
The following messages indicate the state of the system. No action is required.
Message Meaning
Meeting starts! Connection with the remote party has been completed, and
you can now start a conference.
Starting connection. After receiving a call from the remote party the system starts
connecting.
Meeting ends. Operations for ending the conference have been completed.
Please wait. The data is being saved.
Installation completed. Installing the software is completed.
The still image has been sent. A still picture has been transmitted to the remote party.
Still image transmission
cancelled. Transmission of a still image has been cancelled.
Preset 1 (–6) selected. The camera angle and zoom setting has been changed to that
registered in Preset number 1 (–6).
Still image saved to Memory
Stick. The still image has been saved to the “Memory Stick”.
Registered to Preset number 1 (–
6). The camera angle and zoom setting has been registered in
Preset number 1 (–6).
Terminal A (or B, C, D, E) has
disconnected. During a multipoint videoconference the remote party A (or
B, C, D, E) has been disconnected.
Site A (or B, C, D, E) has
disconnected. During a multipoint videoconference the remote party A (or
B, C, D, E) has ended the conference.
The still image from the object
input has been transmitted. The still image input from the Document Stand has been
transmitted.
The slide show is over. The slide show has been ended.
The 1st (–5th) position has been
selected. The terminal on the 1st (–5th) site for a multipoint
videoconference has been selected from the Phone Book.
The terminal participated in the
conference. The remote party of the displayed terminal participates in the
multipoint videoconference.
The terminal has dropped out of
the conference. The displayed terminal ends the multipoint videoconference.
Viewing the terminal. [Terminal
name] The picture of the displayed terminal can be seen on the
screen.
Now upgrading. Wait for a while.
Be sure not to turn off your system
while upgrading. The software is now upgrading. Be sure not to turn off the
Communication Terminal until the upgrading is complete.
Doing so may cause malfunction of the system.
Cascade connection is complete. Cascade connection with the terminals has been completed.
Cascade connection has been
made. Split mode is not available. Cascade connection with the terminals has been made. You
cannot display split windows.
Use of the Private Phone Book is
available. The “Memory Stick” in which the Private Phone Book is
registered has been inserted into the Communication
Terminal. You can use the Private Phone Book.