Sony Ipela PCS-G50, Operating Instructions Manual, Page: 135 / 259

135
Using the Communication Transducer (CTE)
Using the Communication Transducer
(CTE)
The CTE Communication Transducer is an integrated system equipped with
uni-directional microphones and omni-directional acoustic speaker. The unit is
enabled to pick up clear voice with minimum background noise from all
directions and to emit clear sound equally in all directions.
To connect the CTE-600 Communication Transducer
To use the Communication Transducer (CTE)
• Set “CTE” on page 1 of the Audio Setup menu to “LINE”. (page 53)
• Set the SYSTEM SELECT switch at the bottom of the Communication
Transducer to “PCS”.
For detailed information on the Communication Transducer, refer to the
Operating Instructions that come with the Communication Transducer.
TERMINAL VISCA OUT
(MIXED) AUX
AUX MONITOR
LINE
AUX CONTROL
VIDEO OUT
AUDIO OUT AUDIO IN
MIC
VIDEO IN
EC-MIC
CTRL-S
RGB OUT DSB
ISDN UNIT
IR OUT
1 2
1 2
1 2
1 2
DC 19.5V
CAMERA AUX IN
WHITE
BOARD
100BASE-TX/
10BASE-T
(PLUG IN POWER)
to an input/output
connector
AC adaptor (supplied
with the CTE-600)
CTE-600
to DC 6V
to a wall
outlet
to LINE
IN
Cable
(supplied
with the
CTE-600)
Cable (not supplied)
Cable (not supplied)
to AUDIO
IN
to AUDIO OUT
to an input/output
connector
to LINE
OUT
Interface box
(supplied with the CTE-600)