Sony Ipela PCS-G50, Operating Instructions Manual, Page: 32 / 259

32
Turning the System On/Off
When “Standby Mode” under “Device Setup” on the General Setup Menu is
set to “On”, the Communication Terminal will enter standby mode if you do
not operate it for a specified period of time in order to save power.
When the Communication Terminal is in standby mode, the POWER indicator
lights in orange. Once the Communication Terminal receives a call, the
standby mode is automatically released.
To release the standby mode
Press the @ / 1 button on the Remote Commander.
To specify the standby time
Specify the time that you want the system to remain on before entering into
standby mode (1 to 99 minutes) by selecting “Device Setup” on the General
Setup menu, and then setting “Standby Time”. If you do not want the system
to enter the standby mode, set “Standby Mode” to “Off”.
For the “Standby Time” and “Standby Mode” settings, see “General Setup
Menu” on page 56.
• The POWER indicator on the camera goes off when the system enters standby mode.
• If you use a Sony TV monitor with the IR repeater installed under the remote sensor,
the TV monitor will enter standby mode together with the Communication Terminal.
Standby Mode Function
Notes