13
03-01-01 00:00:00 REC REPEAT HI A ALARM 0000
02
On-Screen Data
By pressing the OSD button on the front panel, you
can change the display position or even make them
disappear.
Items except the operation status can be independently
turned on/off with a menu operation
1
Date/
2
Time
In a recording mode or stop status (monitoring the
camera input), the current date (month-day-year on the
HSR-X206 or day-month-year on the HSR-X206P)
and time (hour:min:sec) are displayed.
In playback, the date and time when the recording has
made are displayed.
3
Operation status
The current operation mode is displayed.
REC: Recording
EXT: External timer recording
B
: Playback in the forward direction
b
: Playback in the reverse direction
X
: Still
M
: High-speed playback in the forward direction
m
: High-speed playback in the reverse direction
C
: Slow-motion playback in the forward direction
c
: Slow-motion playback in the reverse direction
Note
When recording and playback are both in progress,
only
B
is displayed.
4
Remaining of recording area
When the recording area OVERWRITE function is set
to OFF with the RECORDING CONDITIONS SET
menu
(page 61)
, the remaining capacity of the recording
area is displayed (in %).
5
Picture quality
In a recording mode or stop status, the picture quality
and recording cycle specified for normal recording are
displayed.
In playback, the picture quality and recording cycle
when the recording has made are displayed.
6
Audio recording
During audio recording, “A” is displayed.
7
Alarm type
The active alarm type is displayed.
ALARM: Alarm recording
PRE: Pre-alarm recording
The indication flashes while the corresponding
recording is in progress.
8
Alarm count
Each time alarm recording is made, the value is
increased by one.
The value will return to 1 if it exceeds 9999.
9
Camera title
The number (or title if defined) of the camera being
selected is displayed.
When an alarm is generated, “EA (external alarm)” or
“SA (sensor alarm)” flashes at the left of the number
(title).
Disk error indication
If an error has occurred on a hard disk, one of the
following error message will appear at the center of the
screen:
DISK ERROR: An error has occurred, but it cannot
be determined on which of the two disks it has
occurred.
DISK ERROR(1): An error has occurred on DISK1
(MASTER).
DISK ERROR(2): An error has occurred on DISK2
(SLAVE).
DISK ERROR(1->2): An error has occurred on
DISK1 then on DISK2.
DISK ERROR(2->1): An error has occurred on
DISK2 then on DISK1.
2
Time
3
Operation status
9
Camera title
7
Alarm type
8
Alarm
count
4
Remaining of recording area
5
Picture quality
6
Audio recording
1
Date
