manualshive.com logo in svg

Sony HSR-X206P, Operating Instructions Manual

Share
Download
Sony HSR-X206P Operating Instructions Manual Download Page 6

6

The Sony HSR-X206/X206P Digital Surveillance
Recorder is a digital video recorder that records
images of high picture quality from surveillance video
cameras for extended periods.  Images are recorded on
the built-in hard disk, and you can achieve high-quality
recording/playback without worrying about the
recording time and durability of cassette tapes as you
would with a recorder using videocassettes.

Features

Long-time recording with large-capacity
hard disks

The recorder is equipped with a pair of 160-GB hard
disks (320 GB in total), permitting long-time
continuous recording.
Examples: Normal recording area 99% and archive
area 1%

1 input, 1 field/sec, HYPER picture-quality mode:

1619 hours (67.5 days)

1 input, 1 field/sec, HIGH picture-quality mode:

2630 hours (109.6 days)

1 input, 1 field/sec, LOW picture-quality mode:

4951 hours (206.3 days)

6 inputs, 1 field/sec at each input, HIGH picture-

quality mode: 438 hours (18.3 days)

High-quality and high-resolution
recording/playback with the motion-JPEG
compression system

Image modes of 5 levels

The HSR-X206/X206P enables you to select from
among five picture-quality modes, i.e. HYPER (52
KB/field), SUPER (44 KB/field), HIGH (32 KB/field),
MID (24 KB/field), LOW (17 KB/field) according to
your purpose or required recording time.  The lower
the resolution you choose, the longer the recording
time that is obtained.

High resolution

A high resolution of 720 

×

 240 pixels (HSR-X206) or

720 

×

 288 pixels (HSR-X206P) can be obtained.

Overview

A variety of recording and playback

The built-in hard disks can be partitioned into three
areas, i.e. normal recording, alarm recording and
archive areas to enable the various possibilities.
• Alarm recording even during timer recording
• Pre-reverse playback, which enables playback

without interrupting the recording in progress.

• Alarm recording using the 10 

×

 14 multipoint activity

detection sensor

• Recording/playback of one channel of audio
• Variable-speed playback with the Jog and Shuttle

dials

•

×

2 Zooming function for picture monitoring

• Program recording function
• Masking function for specified camera(s) in

monitoring

Six inputs

The HSR-X206/X206P has 6 camera inputs for
monitoring and recording.

Built-in multiplexer

The recorder has built-in multiplexing capability,
which allows independent recording and monitoring.
There is also a choice of various monitoring patterns
by freely assigning multiple cameras to single monitor.

Versatile system configuration

Remote control via a network

Using the LAN connector, you can control the recorder
via TCP/IP from a PC (WEB browser) for recording/
playback and data transmission.

Data storage

The CF card slot on the front panel enables data
storage  on memory flash media.  With the use of a CF
card adaptor (Compact Flash Type II), data storage on
memory cards of various types is also possible.

Summary of Contents for HSR-X206P



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands