manualshive.com logo in svg

Sony HSR-X206P, Operating Instructions Manual

Share
Download
Sony HSR-X206P Operating Instructions Manual Download Page 29

29

           <RECORDING DURATION BASE>

   RECORDING DURATION       : 90 DAYS

   TIMER RECORDING (DLY)    : OFF

       START --:--       STOP --:--

   PICTURE QUALITY          : HIGH

   AUDIO RECORDING          : ON

   NUMBER OF CAMERAS        : 6

   REC RATE                 : A1.111 FPS/CAM

When setup is completed

1

Exit from the EASY SETUP display by turning

the Shuttle dial counterclockwise.
The following warning appears:

                   <WARNING>

      REC CYCLE SETTING IN THE MENU WILL BE

             AUTOMATICALLY ADJUSTED.

                 ARE YOU SURE ?

                       NO

        CHANGE WITH JOG, SET WITH SHUTTLE

2

Change NO to YES using the Jog dial then turn the
Shuttle dial clockwise.

If it is executed with NO or if alarm recording is
carried out during setup, the initial EASY SETUP
status will be resumed.  Try setup again.

Confirmation of setup
To confirm the setup result, select Main Menu >
2. RECORD SET > 3. NORMAL REC MODE SET.

               <NORMAL REC MODE SET>

  PICTURE QUALITY          : HIGH

  AUDIO RECORDING          : ON

  REC RATE    : A     10FPS  (  206H)

  REC PROGRAM GROUP        : OFF

Settings: If timer recording is to be made

Enter the recording duration, change the timer from
OFF to ON, then enter the Start/Stop time. Also set the
picture quality.
“- - -” to OFF.  If audio recording is needed, change it
to ON.  At that time “A” is added to the indication of
REC RATE as shown below:

           <RECORDING DURATION BASE>

   RECORDING DURATION       : 90 DAYS

   TIMER RECORDING (DLY)    : ON

       START 08:00       STOP 22:00

   PICTURE QUALITY          : HIGH

   AUDIO RECORDING          : ON

   NUMBER OF CAMERAS        : 6

   REC RATE                 : A1.111 FPS/CAM

When setup is completed
Turn the Shuttle dial counterclockwise.
When the warning is indicated, change NO to YES
using the Jog dial, then turn the Shuttle dial clockwise.

Confirmation of setup
Select Main Menu > 2. RECORD SET > 5. TIMER
SET.
The first DLY line is automatically set, as shown
below.  The SET columns of the second and
subsequent lines are set to OFF.  Note that these
columns become OFF even if they were set to ON
before EASY SETUP.

                 <TIMER SET>

 WEEK  START  STOP   PROGRAM    FPS     SET

 DLY   08:00  22:00    0FF  A  10FPS    ON

 SUN   --:--  --:--    0FF     25FPS    OFF

 MON   --:--  --:--    0FF     25FPS    OFF

 TUE   --:--  --:--    0FF     25FPS    OFF

 WED   --:--  --:--    0FF     25FPS    OFF

 THU   --:--  --:--    0FF     25FPS    OFF

 FRI   --:--  --:--    0FF     25FPS    OFF

 SAT   --:--  --:--    0FF     25FPS    OFF

 EXT   *****  *****    0FF     25FPS    OFF

Notes

• If either Mirroring or Pre-alarm recording is to be set

to ON, be sure to make the setting before EASY
SETUP.

• If Mirroring is set to ON, the REC RATE is restricted

at 30 FPS at maximum.  Also, if Pre-alarm recording
is set to ON, the REC RATE is restricted at 15 FPS.

Summary of Contents for HSR-X206P



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands