Sony HSR-X206P Operating Instructions Manual Download Page 79

Page: 79 / 90

When downloading is finished

The popup

shows “SAVE COMPLETE.”

To terminate downloading, click on the OK button.
The screen returns to its status before you clicked on
the START button.

Note

The popup message may change, according to the
condition.

• If the HDD capacity of the PC becomes full, and

downloading is forcibly terminated before the end,
“STOP SAVE, PC DISK FULL” will be indicated
at

• If any other error occurs, and downloading is forcibly

terminated before the end, “STOP SAVE, ERROR”
will be indicated at

HSR-X200 Viewer

HSR-X200 Viewer is a program designed specifically
for HSR-X200 series.
It can be used to play back image and sound data that
has been copied from this unit onto media such as
computer hard disk drives, and Compact Flash.

For HSR-X200 Viewer, consult your Sony dealer.

Installing HSR-X200 Viewer

Install HSR-X200 Viewer ver. 1.5.1 or later by the
following procedure:

Starting the installation wizard

Double-click the icon for the downloaded “HSR-
X200Viewer***.exe” file to start the installation
wizard.

Note

If the former-version HSR-X200 Viewer has already
been installed, the “Confirm File Deletion” message is
displayed. Click on OK to continue.

When the former-version HSR-X200 Viewer is
deleted, the “Maintenance Complete” message is
displayed. Click on Finish to continue.
Then, perform Step

again to start the installation for

the new-version HSR-X200 Viewer.

Selecting the language settings

Select the display language for the software (Japanese
or English) in the Choose Setup Language window,
then click on OK.

Summary of Contents for HSR-X206P



























































































Search results

Summary of Contents for HSR-X206P

Reviews:

Brands by name

Popular brands

Sony HSR-X206P, Operating Instructions Manual

Search results

Summary of Contents for HSR-X206P

Reviews:

Brands by name

Popular brands