manualshive.com logo in svg

Sony DCR-TRV725E, Service Manual

Share
Download
Sony DCR-TRV725E Service Manual Download Page 236

— 32 —

Fig. 4-19.

4-19. M Slide Plate Assembly, LS Arm Assembly, Cam Gear 2, GL Arm Assembly

1. Removal procedure

1)

Remove the LS chassis block assembly. (Refer to 4-10.)

2)

Remove the guide lock plate (S) (Refer to 4-17.)

3)

Remove the relay gear 

1

.

4)

Remove the M slide plate assembly 

2

 in the direction of the

arrow 

A

.

5)

Remove the LS arm assembly 

3

 and LS arm roller 

4

.

6)

Remove the cam gear (2) 

5

.

7)

Remove the GL arm assembly 

6

 from the lower side of the

cam relay gear (1) in the direction of the arrow 

B

.

Note:

After removing the GL arm assembly, fix the guide gear (S/T)
assembly.

2. Attachment procedure

1)

Attach the GL arm assembly 

6

 to the shaft so that the GL arm

assembly 

6

 is positioned under the cam relay gear (1) .

Note:

The in-phase markings of the guide gear (S/T) assembly and
GL arm assembly 

6

 must be aligned.

2)

While aligning the cam gear (2) 

5

 with the dowel of the GL

arm assembly, attach the cam gear (2) 

5

.

Note:

The in-phase markings of the cam relay gear (1), cam gear (1)
and cam gear (2) 

5

 must be aligned.

3)

Attach the LS arm roller 

4

 to the LS arm assembly 

3

. While

aligning them with the cam groove on the cam gear (2) 

5

,

attach them.

4)

Attach the M slide plate assembly 

2

.

5)

Attach the relay gear 

1

.

6)

Attach the guide lock plate (S). (Refer to 4-17.)

7)

Attach the LS chassis block assembly to the mechaical chassis.
(Refer to 4-10.)

Note:

Check that the in-phase marking of each gear is aligned.

3

 LS arm 

     assembly

1

 Relay gear

4

 LS arm roller

     Be careful not 

to drop.

5

 Cam gear (2)

Cam relay gear (1)

Guide gear 
(T) assembly

Guide gear 
(S) assembly

Cam gear (1)

A

B

2

 Remove the M slide 

     plate assembly in the 
     direction of the arrow 

A

.

6

 Remove the GL arm 

     assembly in the direction 
     of the arrow 

B

.

Cam relay 
gear (2)

Cam relay 
gear (1)

Guide gear 
(T) assembly

Guide gear 
(S) assembly

GL arm 
assembly

Cam gear (1)

M slide plate 
assembly

Cam gear (2)

LS arm assembly

When attaching it, coat the hatched  
      portion with grease.

Hole of mechanism 
chassis

SETTING THE GEAR POSITION

Rotary switch

Coat the cam groove 
with grease.

Summary of Contents for DCR-TRV725E


























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands