— 15 —
Fig. 4-2.
4-2. HCL Arm Assembly, Loading Motor Assembly
1. Removal procedure
1)
Hook the HC arm spring in the direction of the arrow
B
.
2)
Remove the HCL arm assembly
2
from the loading motor
assembly
4
.
3)
Remove the screw (M1.4
×
2.5)
3
.
4)
Remove the three claws of the loading motor assembly
4
from
the mechanism chassis assembly in the direction of the arrow
A
.
2. Attachment procedure
1)
Coat the worm shaft and gear of the loading motor assembly
4
with grease.
2)
Insert the three claws of the loading motor assembly
4
into
the groove on the mechanism chassis assembly.
3)
Attach the screw (M1.4
×
2.5)
3
.
Tightening torque: 0.078 ± 0.01 N•m (0.8 ± 0.1 kgf•cm)
4)
Check the position of the HCL arm assembly
2
and the HC
drive arm. Then attach the HCL arm assembly
2
to the loading
motor assembly
4
.
5)
Hook the HC arm spring
1
on the notch of the loading motor
assembly
4
.
6)
Clean the drum assembly. (Refer to section 2-1.)
4
Loading motor
assembly
A polarity exists.
The marked side has
a red line.
Three
claws
2
HCL arm
assembly
HC drive arm
3
Screw
(M1.4
×
2.5)
Hook the HC arm spring on the notch
of the loading motor assembly.
1
Pull and hook the HC arm spring in
the direction of the arrow
B
.
Remove the loading motor
assembly in the direction
of the arrow
A
.
A
B
When attaching it, coat the hatched
portion with grease.
Mechanical chassis assembly
Loading motor
assembly
(rear view)
Cover
sheet
Loading motor
assembly
Drive pin
Drive pin
