— 21 —
4-8. R Drive Gear Assembly, LS Cam Plate
1. Removal procedure
1)
Remove the blind plate. (Refer to 4-5.)
2)
Remove the lumiler cut washer (0.98
×
3
×
0.13)
1
.
3)
Remove the R drive gear assembly
2
.
4)
Remove the HLC cut (1.8
×
4
×
0.5)
3
and the two screws
(precision type3 +P1.7
×
1.8)
4
.
5)
Remove the LS cam plate
5
.
2. Attachment procedure
1)
Attach the R drive gear assembly
2
with the lumiler cut washer
(0.98
×
3
×
0.13)
1
.
2)
Align the LS cam plate
5
with the two dowels of the LS chassis
block assembly, temporarily fix the LS cam plate
5
with the
two screws (precision type3 +P1.7
×
1.8), then attach it with
the HLC cut (1.8
×
4
×
0.5)
3
.
3)
Adjust the position of the LS cam plate. (Refer to 4-9.)
Fig. 4-8.
When attaching it, coat the hatched
portion with grease.
4
Two screws
(precision type3 +P1.7
×
1.8)
3
HLC cut (1.8
×
4
×
0.5)
5
LS cam plate
When attaching it, coat
the hatched portion
with grease.
1
Lumiler (W)
cut (0.98
×
3
×
0.13)
2
R drive gear
assembly
Do not bend the claw.
Two dowel
