— 19 —
Fig. 4-6.
4-6. Reel Table (T) Assembly, T Soft Assembly
1. Removal procedure
1)
Remove the blind plate. (Refer to 4-5.)
2)
Open the claw of the reel table T assembly
1
in the directions
of the arrows
B
and
C
and remove the reel table T assembly.
3)
Remove the T soft assembly
2
in the direction of the arrow
A
.
4)
Remove the T ratchet spring
3
.
5)
Remove the T ratchet arm
4
in the direction of the arrow
D
.
2. Attachment procedure
1)
Insert the T ratchet arm
4
into the groove on the LS chassis
block assembly to attach it.
2)
Attach the T ratchet spring
3
to the notch of the T ratchet arm
4
and LS chassis block assembly.
3)
Insert the T soft assembly into the groove on the LS chassis
block assembly.
4)
Check the location of the reel table T assembly and attach the
LS chassis block assembly to the shaft.
5)
Attach the blind plate. (Refer to 4-5.)
3
T ratchet
spring
2
Remove the T soft assembly in the
direction of the arrow
A
.
1
Reel table (T)
assembly
4
Remove the T ratchet arm in
the direction of the arrow
D
.
A
B
C
D
The reel table (T)
assembly is at a
slant.
When attaching it, coat the hatched
portion with grease.
Open the claw of the reel table T
in the directions of the arrows
B
and
C
.
Check the location of the reel
table (T) assembly.
