Sony Cyber-shot DSC-P1, Service Manual

Page: 81 / 105

5-24
14. Strobe White Balance Adjustment
Adjust the white balance when the strobe light flashed.
Mode STILL
Subject Flash adjustment box (Note 3)
(1.0 m from the front of lens)
Adjustment Page F
Adjustment Address 4D, 4E, 64, 69, 6A, 6B
Specified Value Y level data: 64 to 98 (Note 4)
R-Y level data: FA to FF or 00 to 06
(Note 5)
B-Y level data: FA to FF or 00 to 06
(Note 5)
A/D integral value data: 0020 or
more (Note 6)
Note 1: Perform “Flange Back Adjustment”, “Light Level
Adjustment” and “Auto White Balance Adjustment”
before this adjustment.
Note 2: Perform this adjustment in the Flash adjustment box.
Note 3: Refer to “4. Preparing the Flash adjustment box”. (See
page 5-7)
Note 4:
Displayed data of page: F, address: 64, of the adjusting
remote commander.
F:XX:64
Displayed data
Note 5:
The right four digits of the page: 1 displayed data of the
adjusting remote commander.
1:XX:XX
R-Y level data
B-Y level data
Note 6:
Displayed data of page: F, address: 69, 6A of the adjusting
remote commander.
F:XX:69
Displayed data
F:XX:6A
Displayed data
XX XX
Page: F, address: 6A (Lower)
Page: F, address: 69 (Higher)
Note 7: Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Switch setting:
1) FLASH ........................ ON
Checking method:
Order Page Address Data Procedure
1 0 01 01
2 5 F1 FF
3 D 63 40 Press PAUSE button.
Perform “Data setting during
4 camera system adjustment”.
(Refer to page 5-13)
5 6 90 00
6 6 91 00
7 6 92 00
8 6 93 60
9 6 6C 01
10 6 2C 01
11 6 01 79 Press PAUSE button.
12 7 01 44 Press PAUSE button.
13 Wait for 5 seconds.
Order Page Address Data Procedure
14 6 01 67 Press PAUSE button.
15 6 02
Check the data changes to
“01”.
16 6 01 00 Press PAUSE button.
17 6 01 79 Press PAUSE button.
18 Wait for 1 second.
19 6 01 67 Press PAUSE button.
20 6 02
Check the data changes to
“01”.
21 6 01 00 Press PAUSE button.
22 6 01 79 Press PAUSE button.
23 Wait for 1 second.
24 6 01 B9 Press PAUSE button. (Note 8)
25 6 02
Check the data changes to
“01”.
26 6 01 00 Press PAUSE button.
27 6 01 79 Press PAUSE button.
28 Wait for 1 second.
29 6 01 67 PAUSE button.
30 6 02
Check the data changes to
“01”.
Check that the Y level data
31 F 64 (Note 4) satisfies the specified
value.
32 0 03 02
Check that the R-Y, B-Y level
33 1 data (Note 5) satisfies the
specified value.
69
Check that the A/D integral value
34 F
6A
data (Note 6) satisfies the
specified value.
Note 8: The adjustment data will be automatically input to page:
F, address: 4D, 4E, 64 and 69 to 6B.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 2C 00
2 6 93 00
3 6 01 00 Press PAUSE button.
4 6 6C 00
5 7 01 04 Press PAUSE button.
6 0 03 00
7 5 F1 00
8 D 63 00 Press PAUSE button.
Release the data setting
9 performed at step 4.
(Refer to page 5-13)
10 0 01 00