1-3
Getting
sta
rted
11
Notes
•
The battery life and number of images will be decreased if you use your camera at low
temperatures, use the flash, repeatedly turn the power on/off or use the zoom.
•
The capacity of the “Memory Stick” is limited. The figures in the table are a guide when you
continuously record/play back while replacing the “Memory Stick.”
•
“----” appears in the display window until the battery usable time is calculated.
•
During charging, the indicators in the display window may not appear correctly or may flash in
the following cases.
— When the battery pack is not installed correctly.
— When the battery pack has malfunctioned.
•
When you turn the LCD screen on and off, it takes about one minute for the correct battery
remaining time to appear.
•
If the power may go off although the battery remaining indicator indicates that the battery pack
has enough power to operate, charge the battery pack fully again so that the indication on the
battery remaining indicator is correct.
•
Use the AC power adaptor near the wall outlet (mains). If any trouble occurs while using the
camera, immediately unplug the power cord from the wall outlet (mains) to cut off the power.
•
Do not short the DC plug of the AC power adaptor with a metallic object, as this may cause
malfunction.
•
Do not expose the battery pack to water.
•
When the battery pack will not be used for a long time, charge the battery pack once fully, and
use it in PLAY mode until it completely discharges. Keep the battery pack in a cool place.
•
Battery life will be shorter when you record with the LCD screen ON. We recommend that you
turn the LCD screen OFF.
Using the AC power adaptor
1
Open the jack cover and connect the DC connecting cable to the
DC IN jack of your camera with the
v
mark facing up.
2
Connect the power cord (mains lead) to the AC power adaptor and
then to a wall outlet (mains).
AC-LS1A AC power adaptor
Jack cover
To the wall outlet (mains)
Power cord
(mains lead)
12
Setting the date and time
When you first use your camera, set the date and time. If these are not set, the
CLOCK SET screen appears whenever you turn on your camera for recording.
1
Slide the POWER switch to turn on the power.
The POWER lamp lights up.
2
Press
v
on the control button.
The menu bar appears on the LCD screen.
3
Select [SETUP] with
B
on the control button,
then press the center
z
.
Control button
POWER switch
Getting
sta
rted
13
To cancel the date and time setting
Select [CANCEL] with
v
/
V
/
b
/
B
on the control button, then press the center
z
.
Auto power-off function
If you do not operate the camera for about three minutes during recording, the camera
turns off automatically to prevent wearing down the battery. To use the camera again,
slide the POWER switch to turn on the camera again.
4
Select [CLOCK SET] with
v
/
V
on the control button, then press the
center
z
.
5
Select the desired date display format with
v
/
V
on the control button, then press the
center
z
.
Select from [Y/M/D] (year/month/day), [M/D/Y]
(month/day/year) or [D/M/Y] (day/month/year).
6
Select the year, month, day, hour or minute
item you want to set with
b
/
B
on the control
button.
The item to be set is indicated with
v
/
V
.
7
Set the numeric value with
v
/
V
on the control button, then press
the center
z
to enter it.
After entering the number,
v
/
V
moves to the next item.
If you selected [D/M/Y] in step
5
, set the time on a 24-hour cycle.
8
Select [ENTER] with
B
on the control button,
then press the center
z
at the desired
moment to begin clock movement.
The date and time are entered.
14
Inserting the “Memory Stick”
Open the battery/“Memory Stick” cover, then press the “Memory Stick” once lightly.
Notes
•
If you do not insert the “Memory Stick” firmly until it clicks, a message such as “MEMORY
STICK ERROR” will be displayed.
•
Never remove the “Memory Stick” or turn off the power while the access lamp is lit up.
•
You cannot record or edit images on a “Memory Stick” if the erasure prevention switch is set to
the LOCK position.
1
Open the battery/“Memory Stick” cover.
Slide the cover in the direction of the arrow.
2
Insert the “Memory Stick.”
Insert the “Memory Stick” with the
B
mark facing toward the battery
compartment as illustrated until it clicks.
3
Close the battery/“Memory Stick” cover.
Removing the “Memory Stick”
Access lamp
Erasure prevention switch
Connector
Label space
