Sony Cyber-shot DSC-P1, Service Manual

Page: 75 / 105

5-18
6. Picture Frame Setting
Mode STILL
Subject Color bar chart
(Color reproduction adjustment
frame)
Measurement Point Video terminal of A/V OUT jack
(75
Ω
terminated)
Measuring Instrument Oscilloscope and TV monitor
Specified Value A=B, C=D, E=F
Note 1:
Displayed data of the page 1 of adjusting remote
commander.
1:XX:XX
XL or YL data
XH or YH data
Setting method:
Order Page Address Data Procedure
1 0 01 01
2 5 F1 FF
3 D 63 40 Press PAUSE button.
Perform “Data setting during
4 camera system adjustment”.
(Refer to page 5-13)
Adjust the zoom and the camera
5 direction, and set to the picture
frame to the specified position.
Mark the position of the picture
frame on the TV picture
monitor, and adjust the picture
6 frame to this position in
following adjustment using
“Color reproduction
adjustment frame”.
7 0 03 18
8 1
Note down the XH and XL
data. (Note 1)
9 0 03 22
10 1
Note down the YH and YL
data. (Note 1)
11 0 03 00
12 5 F1 00
13 D 63 00 Press PAUSE button.
Release the data setting
14 performed at step 4.
(Refer to page 5-13)
15 0 01 00
Check on the oscilloscope
1. Horizontal period
Fig. 5-1-14
2. Vertical period
Fig. 5-1-15
Check on the TV monitor
Fig. 5-1-16
A=B
C=D
A
B
C
D
Color bar chart picture frame
TV monitor picture frame
E=F
V
E F
How to reset the zoom and focus when they deviated:
Order Page Address Data Procedure
1 6 90 XL (Note 2)
2 6 91 XH (Note 2)
3 6 92 YL (Note 3)
4 6 93 YH (Note 3)
5 6 6C 01
6 6 01 79 Press PAUSE button.
7 Wait for 1 second.
8 6 2C 01
9 6 01 00 Press PAUSE button.
Note 2: The data noted dowm at step 8 of “Setting method”.
Note 3:
The data noted dowm at step 10 of “Setting method”.